New
Plarail and new track sections for several systems
Plarail, the blue toy train set from Japan, is now listed in the catalog under “Toys”: straight tracks, half-straight tracks, and double straight tracks; the three-quarter straight tracks (also available with two pins or two holes); curves; and double curves. Make sure to align the pins and holes correctly when connecting the tracks. Plarail tracks do not fit with wooden, LEGO, or DUPLO tracks; the editor indicates this when attempting to connect them. Also included are the retaining rail (also available in half length), left and right turnouts, and Y-turnouts A and B. A turnout can be flipped over to function as a turnout pointing in the opposite direction, with the pin and hole positions reversed.
New track pieces that were previously missing from uploaded layouts:
- Fleischmann Piccolo: Turnouts 9180 and 9181 with electric drive
- Tillig TT Ballasted Track: Curve 83771 (R 396 mm, 15°) and the double-crossing turnouts 83790 (with motor) and 83792 (without motor)
- Peco N Setrack: ST-8 buffer stop for snap-on installation
- Kato Unitrack N: Straight 20-071 (29 mm)
- Atlas H0 Code 100: Half-curve 834 (18", 15°), connecting track 840, and the short sections 3/4", 1 1/4", 1 1/2", and 2 1/2" from the 847 series
- LGB: Extendable track 10090 (88–120 mm)
- Kato Unitrack HO: Extendable track 2-194 (S212S, 212–252 mm)
New to the Tillig TT Model Track Line:
- Three-way turnout 83230 (166 mm, both branches R 353 mm, 15°)
- EW2 turnouts (right and left) with concrete ties (83333, 83334)
- 15° outside curve turnout with concrete ties (83381)
- EW1 right and left turnouts in a new design (83328, 83329), successors to 83323 and 83324, same dimensions
- The sold-out predecessors (EW1 83323 and 83324, inside-curve turnouts 83361 and 83362, crossing 83160) are now listed under “No Longer Available.” When laying track automatically, Trackplanner uses the available successor models, and the parts list specifies the successor for the old part numbers. Existing layouts remain unchanged.
- The older versions of the EW1, 83321 and 83322, and the EW1 with burnished rails, 83326 and 83327, have been added, also under “No Longer Available.” Layouts from SCARM and AnyRail that include 83321 or 83322 now display these numbers instead of 83323 and 83324.
Tillig TT Ballasted Track with brown ballast:
- All tracks, turnouts, inside-curve turnouts, the crossing, and the double-crossing turnouts are now also available with brown ballast, for example, the transition piece 83729. The dimensions are the same as for the gray ballast.
- Brown ballast appears brown in the plan view, in 3D, and in print. The catalog includes a filter row labeled “Ballast: All · Gray · Brown.”
- When Trackplanner lays tracks itself—such as when continuing construction or inserting a turnout—it uses the ballast color of the adjacent track.
- New: Curve R31 83770 (R 396 mm, 30°) and the connecting track 83742 with an interference suppression capacitor. The sold-out 83740 is listed under “No Longer Available,” with 83742 as its successor.
New turntables:
- Arnold N: Turntable 6381 with up to 48 tracks spaced 7.5° apart
- Rokuhan Z: S037 digital turntable with up to 24 tracks spaced at 15° and an outer diameter of 170 mm
- Hornby: R070 electric turntable with up to 14 tracks spaced at 22.5°
- Walthers H0 Code 83: Turntables 933-2860 (90 ft) and 933-2859 (130 ft). The tracks can be positioned freely, with a minimum spacing of 7.5°. If the turntable is mounted on a baseplate, the baseplate is provided with the mounting hole.
New for MTH RealTrax and Lionel tubular track (Gauge 0):
- MTH RealTrax: Curve O-82 (40-1082, radius 1041 mm, 22.5°, 16 pieces per circle). The recommended spacing for parallel tracks remains 152 mm.
- Lionel O tubular track: O-42 remote turnouts, left and right (6-12081, 6-12080)
- Lionel O-27 tubular track: O-42 long-distance turnouts, left and right (6-65167, 6-65168) with built-in motor
Corrected:
- Atlas H0 Code 100: Curve 836 (22") has a 22.5° angle instead of 30°; 16 pieces form a circle. Layouts using this curve include a note about the modified piece when opened.
- Extendable tracks now indicate their adjustment range, such as Minitrix 14975 (86.5–120 mm), Kato Unitrack N 20-050, Tomix 1525/1526/1528, Rokuhan R031, Walthers 948-10091/948-83091, and Fleischmann Profi 6110. Minitrix 14975, Fleischmann Piccolo 9110, Arnold 1121, and Märklin Z 8592 were previously listed in the catalog as flex track. The parts list had grouped them as bent flex track, even though they cannot be bent. Now it uses the system’s flex track for this purpose, and an extendable track counts as one piece.
- The Fleischmann Profi 6110 is 80 mm long instead of 100.9 mm; the Walther 948-10091 and 948-83091 are 225.4 mm long instead of 225 mm.
- Peco Streamline Code 100 SL-102, Hornby R8090, and Shinohara 185 were listed in the catalog as short, fixed straight tracks. These are flexible tracks: SL-102 with concrete ties, 914 mm (predecessor to SL-103), R8090 semi-flexible, 915 mm, and 185 with concrete ties, 1 m. These tracks retain their position and length in existing layouts and are now listed as flexible track in the parts list.
- Minitrix: For the R3/R4 curved turnouts (14947/14948 and their predecessors 14981/14983, 14970/14971), the end of the outer branch was 15 mm off from the correct position. Two curved turnouts now form a track transition between R3 and R4 over 60°, just like on a real track. Layouts with these turnouts display a note when opened; a track on the outer branch can now run alongside the connection there.
- Märklin 72941 sliding platform and its predecessor 7294 (C, K, and M track gauges): There are now five connections on each side—the access track and four siding tracks—spaced 77.5 mm apart. On the right, the four storage tracks are offset by 12.8 mm, as shown in the connection diagram in the instructions; only the access track at the bottom is aligned on both sides. Previously, there were two on one side and eight on the other. The base plate again measures 360 × 420 mm, and the connectors are located at its edge rather than at the end of the platform, as shown in the Märklin instructions. Diagrams featuring this sliding platform include a note when opened; Tracks that were attached to the platform are no longer connected and must be reattached.
- Minitrix: The 66540 sliding platform has seven connections on each side, spaced 33.6 mm apart. They are located at the edge of the 220 × 300 mm base plate, so a track connected to it begins there and not at the end of the platform. Previously, there were two on one side and six on the other.
New track systems:
- Gauge 0: GarGraves Phantom (three-wire), Lionel O and O-27 tubular track, Atlas O two-wire (Code 148), Ross Custom Switches, and KM1 Gauge 0
- G Gauge: Bachmann Large Scale, USA Trains (brass), and Train Line 45
- 1 Gauge: KM1 with real wood or plastic ties, plus KM1 1e (narrow gauge 22.5 mm)
- G Gauge (1:64) is new: Lionel American Flyer FasTrack
- H0 Narrow Gauge: Tillig Elite H0m, Minitrains H0e, and Kato Unitrack H0e/OO-9
- N Gauge: Micro Engineering Code 55 and Code 70
- Märklin my world: the plastic track set featuring straight sections, curves, a track-laying aid, a buffer stop, and left and right turnouts from turnout set 23401
- Bemo H0e (9 mm): Flexible track and 12° turnouts, available as manual turnouts and with built-in motors
- KB Scale 0n14: Light railway on a 7 mm scale with 14 mm gauge—a new gauge. You build the tracks yourself using components from KB Scale; the catalog lists the dimensions from the assembly instructions: straight tracks, curves in three radii, and Type 1 and Type 2 turnouts.
- Rokal TT (track from 1967): Straight tracks, curves, turnouts, and crossings according to the 1968 catalog
- Rivarossi H0 (1967/68): Straight tracks, curves, turnouts, and crossings
- Egger-Bahn H0e (1965/66): straight tracks, curves, turnouts, and the crossing
- Röwa H0 (ballasted track, 1972/73): straight tracks, curves in four radii, and the crossing
- Marx Gauge 0 (O27 and O34): Straight tracks, curves, and crossings
For KM1, Röwa, and Marx, the turnouts are still missing; for Märklin my world, the crossing and turntable are missing because no dimensional specifications are provided for them. What is missing is also listed on the system’s data sheet.
New in the “Bridges” accessory category: the S023 double-track sheet-metal girder bridge from Rokuhan (Z gauge, 110 mm, reddish-brown). Rokuhan supplies it without track. You lay the track yourself and place the bridge underneath it, and the parts list lists the track and bridge separately.
Automatically translated ·
Does this help? You can leave a tip.